Our shell holders are cut from precise patterns and held to high manufacturing standards. However, due to thickness, density & flexibility differences in natural leather, some break-in is required with several of our shell holder models. 2 to 3 days should be sufficient to break-in your leather loops. It’s also a good idea to wear the shell holders on your belt, prior to your hunt, as they will also conform to your waist. C-1 “wallet” style holders should be filled with your ammo immediately and given time to conform to same. C-2 leather loop holders should also be filled upon delivery so that the loops will mold to your cartridges. A light coat of petroleum jelly can be applied to the cartridges, if they are difficult to insert for the first time. C-8 cartridge belt w/leather loops. The above applies and if the new belt can be worn prior to field use -all the better. We do not recommend mixing calibers with our Leather Loop Shell Holders, so that a balance of access/retention of your ammo can be assured. Elastic loop versions C-2, C-8, and Models C-3, & C-3CRP do NOT require any break-in and can accommodate a range of cartridges based on their intended size design. While the C-3B is made with Leather Loops, it does not have to be dedicated to a specific cartridge or caliber, as it has a flap for retention and the loops are roomier.

Shell Holders

C-3 Rifle Shell Holder Our most popular model... Belt type with full leather enclosure, 7 round capacity with heavy duty elastic retention loops, rattle proof, soft point protection, fits one row of cartridges flat against your belt. Fully nylon stitched, available in cartridge sizes from 25.06 through 570 Nitro. Please specify caliber. Some African calibers limited to 6 rounds. 6 round African calibers 416 Rigby thru 577 N/E $95 7 round std. calibers 243, 308, 270,' 06, 300 Win., 300 Jarrett, 416 Rem., 458 Lott $95 10 round African Calibers 416 Rigby thru 577 N/E $125 10 round std. calibers $125 Select Model 6 round African $95.00 USD 7 round Standard $95.00 USD 10 round African $125.00 USD 10 round Standard $125.00 USD Specify Caliber C-3 Shell Holder 10 round C-1 Rifle Shell Holder Belt type made from billfold leather. Fold-over, double layer style with two safety snaps, 9 round capacity, virtually rattle- proof, soft point protection, and available in 4 cartridge sizes. Short - .243, 308, etc. length $80 Medium - 30.06, 300 Winchester, etc. $80 Long - 375 H&H, 300 Weatherby, 300 Jarrett, .416 Remington, .458 Lott, etc $80 W size - 378, 460 Weatherby, 416 Rigby, 300 Rem Ultra etc. $80 Winchester Short Mag$80 Select Size: Short - 243 length Medium - 30.06, 300 Winchester etc Long - 375 H&H, 300 Weatherby, 300 Jarrett, etc W size - 378, 460 Weatherby, 416 Rigby, 300 Rem ultra etc Winchester short mag Specify Caliber Dick, I just received the C-1 shell holders the other day and they are outstanding. A very practical design and well made using high quality materials. I took your advice and put the shells in them so they will form fit before our hunt. Thanks again, J.V., Macomb, MI C-2 Rifle Shell Holder Belt type with heavy duty elastic loops. We use only US made industrial grade elastic, and the loops are double nylon stitched (sides and bottom) to insure cartridge retention and soft point protection. Leather loops optional. Available in several sizes (African cartridges). Please specify caliber. 6 round model 25.06 thru 416 Remington Elastic Loops $85 Leather Loops $95 10 round model 25.06 thru 416 Remington Elastic Loops $95 Leather Loops $105 6 round Nitro Express 470-500 etc. Elastic Loops $85 Leather Loops $95 8 round Nitro Express 470-500 etc. Elastic Loops $95 Leather Loops $105 6 round: 505-577 Class Elastic Loops $85 Leather Loops $95 8 round: 505-577 Class Elastic Loops $95 Leather Loops $105 Leather loops are double stitched and individually sized to specific calibers. C-2 With leather loops C-2 Shell Holder with Elastic Loops Select Model 6 round model 25.06 thru 416 Remington $85.00 USD 10 round 25.06 thru 416 Remington $95.00 USD 6 round Nitro Express 470-500 etc $85.00 USD 8 round Nitro Express 470-500 etc $95.00 USD 6 round 505-577 class $85.00 USD 8 round 505-577 class $95.00 USD Specify Caliber C-2 Shell Holder with Leather Loops Select Model 6 round model 25.06 thru 416 Remington $95.00 USD 10 round 25.06 thru 416 Remington $105.00 USD 6 round Nitro Express 470-500 etc $95.00 USD 8 round Nitro Express 470-500 etc $105.00 USD 6 round 505-577 class $95.00 USD 8 round 505-577 class $105.00 USD Specify Caliber C-2 Shell Holder with Open Leather Loops Select Model 6 round model $85.00 USD 8 round model $95.00 USD Specify Caliber[s] ( AVAILABLE FOR RIMMED CALIBERS ONLY ) C-2 Murray Rifle Shell Holder with Open Leather Loops New for 2013, we are now offering the C-2 in an "open loop" version for rimmed cartridges only. Pictured is the 6 round model with 470 NE cartridges.Also available in an 8 round version." 6 Round Model $85 8 Round Model $95 Dear Murray Leather A friend of mine a few years ago was going to an SCI show and told me about your products, being in Australia I hadn’t heard about you and so took a chance and gave him the money to buy me one of your bullet pouches. During late autumn to early spring I hunt Sambar deer with scent trailing hounds in the mountains of Victoria. I have had this pouch strapped to a chest harness for at least 6 or 7 years, I think. In that time its coped with snow, hail, rain, blood, blackberries, assorted undergrowth, hound leads, hounds and gun dogs using my chest as a rest for their paws to give me a friendly sniff in the chance of a rub and pat. In all that time od abuse not one thread has given way nor has the press studs stopped working and the scratches inflicted have been so minor. Prior to buying this pouch I had used cheap leather ones as well as the nylon ones, and after a year or two they all gave up in one form or another. So I would like to give you and your staff a massive praise in making such a durable and well made product, it has been sensational, thanks for making it. Respectfully, B.D., Victoria, Australia Dick, I have three main hunting rifles and your quality butt stock shell holder is on all of them. Thought you might like to see my trusty and ever faithful 30-06 with the shell holder on it when I took my SCI record Coastal Island Black Bear on June 3, 2007. Your products not only look good, but and most importantly, are completely functional. I recommend them to all my friends. Sincerely, A.W., Westcliffe, CO

Note: We will ship your order via UPS, UPS Sure Post, or USPS Priority mail. When we ship via UPS or UPS Sure Post, we do NOT always determine if a signature is required. UPS makes this decision based on value & location. You may enroll in UPS My Choice if you would like to setup your personal preferences for delivery. C-2 50 BMG 5 round carrier for 50 BMG. Leather loops are extra long for 750 gr. A-Max bullet. $125.00 C-3A Rifle Shell Holder Belt type with full leather enclosure, 14 round capacity, fold over double layer style with heavy duty elastic retention loops, rattle proof, soft point protection. Fully nylon stitched, available in 14 round std. calibers $160 12 round model: African cartridges $160 20 round all calibers $190 Select Model 14 round Standard $160.00 USD 12 round African $160.00 USD 20 round All Calibers $190.00 USD Specify Caliber C-3A Shell Holder 20 round C-3B Rifle Shell Holder Belt type with pre-formed leather loops, nylon stitched, rattle proof, silent opening with brass stud, saddle tan oiled finish, soft point protection, very compact. Available in cartridge sizes from 5 round model for 416 Rigby ultra mag, 470, 500, Winchester Short Mag, etc. $100 7 round model for 06, 300, 375, etc. $105 Select Model 5 round 416 Rigby, Ultra Mag, 470, 500 etc & short mags $105.00 USD 7 round for 06, 300, 375 etc $105.00 USD Specify Caliber C-3B shell holder in action down under Photo courtesy Adam Christo C-3C-RP Buttstock Shell Holder $140 Lace-up type designed for straight stocked rifles, 8 elastic loops, nylon stitched on a rich saddle tan leather, quick access and available in cartridge sizes from 270 through 577 Nitro. Available in left- or right- handed version. Recoil Proof, designed for no movement on recoil with a 2-inch width nylon strap over the recoil pad. Makes for much easier installation." (6 round capacity for most African calibers) C-3S-RP Buttstock Shell Holder $140 New for 2013, Shotgun model with 5 leather loops For all gauges. Murray C-3C WBY For extreme Monte Carlo stocks - stitched & formed Price: $150.00 C3C-RP & C3S-RP are also available in black Select black model in the menu below. Select Model C-3C-RP Butt Stock Shell Holder $140.00 USD C-3-S-RP Butt Stock Shell Holder $140.00 USD C-3C WBY Butt Stock Shell Holder $150.00 USD C-3C-RP Butt Stock Shell Holder Black $150.00 USD C-3-S-RP Butt Stock Shell Holder Black $150.00 USD Specify Right or Left Handed Shooter Right Handed Left Handed Specify Caliber or Gauge Hello Dick, Enclosed is a picture of nice Alberta whitetail. Thank You for making a quality shell holder. Up in the North Country sound travels. Your shell holders keep the cartridges rattle free and protect them. You have to keep your noise to a minimum up in that big bush country. And they are made in the Good Old U.S.A. Thanks, M.F. © Copyright MurrayCustomLeather.com

	Belts & Ammo Belts Bags & Portfolios Saddle Scabbards Handgun Accessories Contact & Ordering Info	Rifle Slings Rifle & Shotgun Cases Knife Cases Upcoming Shows General Information
New! Customer's Gallery